带有显示器的 Inline 叶轮式传送器

类型 SE32 / 商品编号 00436475

德国burkertSE32 流量计显示器00436475 现货

facebookgoogle plustwitter

The depiction of the products may differ from the actual specific design.

德国burkertSE32 流量计显示器00436475 现货

商品编码

90261021

国家

FR

8032 www.burkert–usa.com Page 1/12 Paddle–wheel fl ow controller for On/Off control • Indication, monitoring, transmitting and On/Off control in one device. • Programmable outputs (Transistor or relay) • Automatic–calibration: TEACH–IN • Communication – external setpoints and/or process value (4–20 mA) or AS–interface • Approvals: Type 2702 (8630) Control valve with TopControl Type 1067 Continuous SideControl Type 8644–P AirLINE Valve Island with electronic I/O Type 8032 can be combined with... This inligent paddle-wheel switch with display is designed for use in clear, neutral or aggressive liquids and specially to switch a valve and to establish a monitoring system or an On/Off control loop. The switching points can be programmed with the 3–key keypad under the display or optionally, for the compact 8032 only, from an external source over a 4–20 mA loop. Type 8030 Only with 8032 remote The compact 8032 is proposed with ON/OFF output, or with external setpoints and/or process value outputs or also in AS–interface version. The remote 8032 has a transistor output. The connection to the process in the piping is done with the quarter-turn technique of the INLINE fi ttings. Type 8032 compact Type 8032 remote Electronic module data (continued) 800 Ω at 24 V 500 Ω at 18 V Input External Setpoint 8032 4-20 mA, galvanic insulation Max. input impedance: 250 Ω Input frequency 8032 remote Pulse signal: 2 to 400 Hz Input impedance: 10 kΩ Fieldbus AS-Interface Current consumption 8032 Max. 80 mA (no load) 8032 remote Max. 50 mA (no load) + remote sensor current consumption Materials Housing PC +20% glass fi ber Seal FKM (EPDM option) Front panel folio Polyester Wall–mounted holder PVC Electrical connections Cable plug EN 175301-803 Multipin 5 pin M12/ 4 pin M12 / 8 pin M12 General data Ambient temperature 32°F up to 140°F (0 to 60 °C) Voltage supply cable Cross–section 0.14 up to 0.5 mm² Recommended length Max. 100m, shielded Remote sensor connection length Max. length /Max. cross–section 50 m / 0.5 mm² Protection class IP65 with cable plug Standards EMC EN 50081–1, 50082 –2 Security EN 61010-2 Vibration EN 60068–2–6 Shock EN 60068–2–27 1) Valid for: External setpoint input, process value output and AS-interface Fitting data Pipe diameter 1/4“ – 2 1/2“ (DN 6 up to DN 65) Measuring range 1.0 f/s up to 32.8 f/s (0.3 m/s up to 10 m/s) Fitting Type S030 (see corresp. data sheet) Sensor element Paddle–wheel of the fi tting S030 Materials wetted parts PVDF, ceramic Medium data Medium temperature (max.) 32°F up to 122°F (with PVC fi tting) 32°F up to 176°F (with PP fi tting) 32°F up to 212°F (with Stainless steel, brass, PVDF fi tting) Fluid pressure max. 140 PSI (PN10) (with plastic fi tting) 230 PSI (PN16) (with metal fi tting) Viscosity 300 cSt. Electronic module data Switching accuracy Teach–In ±1% fs. Standard K–factor ±1% fs., ±3% of measured value Programming mode Threshold, window or hysteresis Repeatability 0.4% Voltage supply 8032 compact 12–30 VDC 8032 remote Depends on the remote sensor: 8041–> 18–30 VDC 8020; 8030–> 12-30 VDC other–> min.12 VDC, max. 30 VDC Reversed polarity of DC Protected Outputs transistor 8032 remote NPN and PNP, 700 mA, 30 VDC max. Outputs 8032 Transistor (programmable) NPN and PNP, open collector, 5–30 VDC, 700 mAmax. protected against short circuits Relay (programmable) 3A/250 VAC or 3A/30 VDC 3A/48 VAC or 3A/30 VDC 1) Process value (option) 4–20mA, galvanic insulation Loop resistance: 1100 Ω at 32 V