burkert 00423981宝德•DN06 to DN65•Closed pipe system, i.e. sensor included in fitting•Quarter-turn technology•Transmitter available also with extended functions - Indication, Monitoring, Transmit
burkert 00423981宝德
INLINE sensor-fitting with paddle wheel for flow measurement
- On/Off control, Batch control
burkert 00423981宝德
Type 8030 Type 8032
Flowmeter On/Off flowmeter
The sensor-fitting S030 has a built-in paddle wheel to measure the flow rate. When liquid flows through the pipe, the paddle wheel is set in rotation producing pulses which frequency is proportional to the flow rate.
The Bürkert special construction, called ”IN-LINE Quarter-turn” technology, ensures leak-age free operation.
The paddle wheel rotation (permanent magnets included in the wheels) is detected contactless through the sensor-fitting wall. The transmitter can be snapped-on or removed without open-ing the pipe or interrupting the process.
The Bürkert
Quarter-turn technology
Type SE30 Ex | Type 8035 | Type 8036 | Type 8611 |
Flowmeter | Flowmeter | Flowmeter | Universal-Controller |
ATEX version |
|
| eControl |
General data
Pipe diameter | DN06 to DN65 |
|
|
Measurement range | from 0.5 to 1200 l/min |
|
|
Flow velocity | 0.3 to 10 m/s (see flow diagram) |
|
|
Measurement error | ±01% of Reading1) (at the teach flow rate value) |
Teach-In (via a remote transmitter) | |
Standard K-factor | ±2.5% of Reading1) |
Linearity1) | ±0.5% of F.S.* |
Repeatability1) | ±0.4% of Reading |
Process connections |
|
Metal | Internal or external thread, weld ends, Clamp or flange |
Plastic | True union, spigot or external thread |
Materials |
|
Seal | FKM or EPDM (depending on version, see ordering chart) |
Body | Stainless steel (316L -1.4404), brass (CuZn39Pb2), |
| PVC, PP, PVDF |
Screws | Stainless steel (316L -1.4404) |
Paddle wheel | PVDF (PP on request or stainless steel, see data sheet 8030HT) |
Shaft and bearings | Ceramics (Al2O3) |
|
|
Medium data |
|
Medium temperature | 0 to 50°C (32 to 122°F) for sensor-fitting in PVC |
| 0 to 80°C (32 to 176°F) for sensor-fitting in PP |
| -15 to 100°C (5 to 212°F) for sensor-fitting in stainless steel, |
| brass or PVDF |
Medium pressure (max.) | see pressure/temperature chart |
Metal | PN16 (232.16 PSI) (PN40 (580.4 PSI) on request) |
Plastic | PN10 (145.1 PSI) |
Fluid properties | clean, neutral or slightly aggressive, solid-free liquids |
Pollution | max. 1%, size of particles 0.5 mm max. |
Viscosity | 300 cSt. max. |
18601768506
打印当前页
发邮件给我们：514403665@qq.com